Services ceased at 10:50GMT
Services established and stable 09:52GMT
Follow CBS_Satfacts on Twitter
My Tweets-
Recent Posts
Previous Productions
Search Content
Meta
Previous Production’s Info
Services ceased at 10:50GMT
Services established and stable 09:52GMT
The main broadcast is slated to be starting very shortly at 1805GMT/1905BST~UK
Test “Road” 10.00-11.00 GMT, 11.00-12.00 BST this morning 9th June.
Service ceased at 19:58GMT – Clean and stable TX
Content concludes at 19:55GMT
Service established and stable at 13:56GMT
Tuning signal will commence at 14:00GMT/15:00BST (UK)
11:15GMT – Service ceased
10:16GMT – Audio re established
10:10GMT – Service established and stable. Currently no audio
This morning’s test TX will commence at 10:15GMT/11:15BST (UK)/12:15CEST
The feed is now up and stable on both IS-1002 and IS-905
The test runs until 1855BST: then the main programme starts.
It is scheduled to run to 2100BST
UPDATE @1055BST. The feed from the Tate is on both satellites. It is currently BARS + TONES only. Service ID is “Matisse Live”
A reminder that the Test starts at 1100UK for 1-hr with the feed on IS1002 and IS-905.
As this feed has very similar parameters to a recent live event YOU MUST CLEAR OUT YOUR OLD SAVED CHANNELS BEFORE ATTEMPTING TO TUNE.
Hope all goes well and do call the Helplines as needed.
Service ceased at 21:26GMT
Content concludes at 21:24GMT
Service established and stable at 16:21GMT
Online clock here
Service ceased at 11:00GMT
Service established and stable 09:57GMT
This mornings test begins at 10:00 GMT / 11:00BST (UK) / 12:00CEST
Online clock here
As you might be aware, there were widespread difficulties affecting some Icecrypt receivers during the first TX test yesterday. Some tune in immediately, some will see the service at the tuning input stage, but not lock to it as once the tuning scan has completed. This is an instability within the Icecrypt platform and NOT a transmission error.
If your receiver will not lock to the signal this morning you must do a Factory reset.
Instructions for factory reset. (Icecrypt 6000)
Menu
Settings
Installation
System recovery
System recovery to factory defaults
PIN 0000 (if you haven’t changed it)
At ‘Do you want to Factory Reset’ command. Select YES
Displays ‘Resetting’ for 30 seconds
Once complete, the display may disappear. If this is the case, press the resolution button and wait 5 seconds. If it is still black, press resolution button again and wait another 5 seconds. Continue this until your display re appears
Select English
Don’t change anything on DHCP / IP settings page. Just select Next
Select GMT 0 (zero) – London
Select off on daylight saving page
Now try to retune – you will need to update your dish setting page if you have an unconventional set up.
If you need to test your system before the transmission starts, use the BTV 1 channel ONLY. (11247, Vertical, 24500, DVB, 7/8)
NO other FTA channel is suitable for testing a system for RSC/NTLive/Met Opera – irrespective of what others might have told you.
It seems that SOME Icecrypts are having issues tuning in this morning.
This might help:
1. Delete ALL channels.
2. Power down the receiver using the switch on the back. Wait about 30 secs.
3. Then attempt a retune.
4. If this fails then try a factory reset and then repeat 1-3.
As many people are successfully receiving we know that the feed is good. We are not sure why the Icecrypt is misbehaving.